Comments Off on Antenna Diplexer 400 Tetra / Mobile
An antenna diplexer or RF diplexer is a unit or module that enables two antenna feeds to be combined and carried down one feeder. Conversely, it can act as a splitter to enable the signal from one feeder to be connected to two receivers or antennas.
Tetra 400 / Mobile Diplexer
Diplexer 400 Tetra / Mobile
Tetra and mobile antenna diplexer enables Tetra security and Mobile Cellular radio signals to be combined or split with a single feeder.
Enabling multiple transmitters to use a single antenna: Mobile services often use multiple frequencies, possibly for different Mobile Network Operators. In view of the size and cost of the antennas they may have a single antenna and they may want to combine the signals from several transmitters to feed into the antenna. As they are on different frequencies, it is possible to use a diplexer to combine the signals and use a single feed.
Enabling a multiband transmitter to use different antennas according to frequency.
Allowing single feeder to be used for multiple feeds. The signals from he antennas can be combined at the antenna end using diplexer, and a second diplexer at the point of use to route the signals.
More new products for 5G: http://www.inbuildingprojects.com/?p=909
Comments Off on Compact 5G parts Solves Coverage Problems
Parts for 5G
Modern wireless communication systems, such as 5G, bring great challenges on radio frequency sub-systems, which should support multiple RF chains operating at different frequency bands and for various modes. MIMO antennas are key technology for 5G with tens or even hundreds of RF channels co-exist within a limited volume. The size of RF components are problematic issues, which play an important role in the overall behavior of wireless systems.
We are glad to share our latest products in Radio Frequency systems.
These new parts adds value to your 4G & 5G Systems. In the photo are our new:
3dB Hybrid Coupler
Attenuator
Termination Load
Circulator
High Power Splitters for 4G
Benefits & Application
These are vital components to be used with your Base Station, Node B, or BDA. They can be used with your passive, active or hybrid DAS.
These components offers good system isolation to avoid interference, together with low insertion loss they are your ideal selection to bring excellent voice quality and data throughput to your customers.
Often on site or in the lab, you may have a need to quickly test a cable or an RF component before implementation. Experience shows that it is often wise to test before installations. Here is a sample of what you may do with our USB Tester.
Comments Off on USB Testers for RF – Compact & Mobile
DTEST – USB Testers for RF
The DTEST solution is designed for RF Engineers who needs to carry compact, lightweight and yet powerful test tools for on site work. It is made up of:
Signal Generator / Transmitter
Spectrum Analyser / Receiver
Signal Generator powered by USB – Model USG35-4400
Our monopole antenna for Tetra 400 / 800 and Trunk Radio Systems. These are ideal for outdoor sites, BTS and oDAS. They withstand wind loading and are very durable and stable in performance.