Archive
Antenna Diplexer 400 Tetra / Mobile
An antenna diplexer or RF diplexer is a unit or module that enables two antenna feeds to be combined and carried down one feeder. Conversely, it can act as a splitter to enable the signal from one feeder to be connected to two receivers or antennas.
Tetra 400 / Mobile Diplexer
- Tetra and mobile antenna diplexer enables Tetra security and Mobile Cellular radio signals to be combined or split with a single feeder.
- Enabling multiple transmitters to use a single antenna: Mobile services often use multiple frequencies, possibly for different Mobile Network Operators. In view of the size and cost of the antennas they may have a single antenna and they may want to combine the signals from several transmitters to feed into the antenna. As they are on different frequencies, it is possible to use a diplexer to combine the signals and use a single feed.
- Enabling a multiband transmitter to use different antennas according to frequency.
- Allowing single feeder to be used for multiple feeds. The signals from he antennas can be combined at the antenna end using diplexer, and a second diplexer at the point of use to route the signals.
- More new products for 5G: http://www.inbuildingprojects.com/?p=909
#4G #5G #wireless #mobile #rf #radiofrequency #das #inbuilding #inbuildingwireless #inbuildingcoverage
Interference to your 5G services?
Better Data with our New Bandstop Filter
With more and more of our clients having problems with interference from different RF sources, this new filter helps prevent it.
Interference Prevention with Customisation
We can customise any Passband and Stopband for your case with 30 to 50 dB rejection suiting your needs.
This will improve voice and data significantly, bring more traffic, more revenue and happier customers in the network with improved LOYALTY!
Filter with DIN connectors
Specifications | |||
Passband | MHz | 1960-1980 | 2150-2170 |
Stopband | MHz | 1983.1~1990 | |
Insertion loss | dB | <1.0 @ 1960 – 1979 MHz<1.7 @ 1979 – 1980 MHz<0.5 @ 2150 – 2170 MHz | |
Stopband Rejection | dB | >45 @ 1983.1~1990MHz | |
Return Loss | dB | >15 @ 1960 – 1980 MHz>18 @ 2150 – 2170 MHz | |
IM3 | dBc | <-160 @ 2x40w carriers | |
Connector | 7/16 DIN | ||
Impedance | Ω | 50 | |
Power | dBm | 50 Average Power54 Spontaneous Power |
Compact 5G parts Solves Coverage Problems
Modern wireless communication systems, such as 5G, bring great challenges on radio frequency sub-systems, which should support multiple RF chains operating at different frequency bands and for various modes. MIMO antennas are key technology for 5G with tens or even hundreds of RF channels co-exist within a limited volume. The size of RF components are problematic issues, which play an important role in the overall behavior of wireless systems.
More new products http://buff.ly/2FuDKu3
#4G #5G #wireless #mobile #rf #radiofrequency #das #inbuilding #inbuildingwireless #inbuildingcoverage
New Equipment for 5G Networks
New and Improved – Latest RF Components
We are glad to share our latest products in Radio Frequency systems.
These new parts adds value to your 4G & 5G Systems. In the photo are our new:
- 3dB Hybrid Coupler
- Attenuator
- Termination Load
- Circulator
Benefits & Application
These are vital components to be used with your Base Station, Node B, or BDA. They can be used with your passive, active or hybrid DAS.
These components offers good system isolation to avoid interference, together with low insertion loss they are your ideal selection to bring excellent voice quality and data throughput to your customers.
Professional RF Tests
Often on site or in the lab, you may have a need to quickly test a cable or an RF component before implementation. Experience shows that it is often wise to test before installations. Here is a sample of what you may do with our USB Tester.
.
Check below for more information.
Signal Generator powered by USB
USB Testers for RF – Compact & Mobile
The DTEST solution is designed for RF Engineers who needs to carry compact, lightweight and yet powerful test tools for on site work. It is made up of:
- Signal Generator / Transmitter
- Spectrum Analyser / Receiver
Signal Generator powered by USB – Model USG35-4400
PC Based Spectrum Analyser – Model NWT25-6000
Data Sheet:
Signal Generator powered by USB
MIMO WiFi 3 Sector Antenna
Our MIMO antenna solution for WiFi, featuring:
- Dual band 2.4 & 5.8 GHz
- 17 dbi gain
- 120 degrees (for 3 sectors)
- 4 N connectors
- MIMO
- High Quality Performance for Outdoor sites
- High Gain
- Easy to install
Antenna for Stadium, Triband MIMO
Stadium Challenges for Mobile Services

- Multiple services GSM, UMTS and LTE, plus WiFi, Security, CDMA etc.
- Multiple Operators, neutral hosts
- High capacity
- High density
- High precision required in Antennas mounting
- Carefully designed sectorisation & calibration
824-960 / 1710-2170 / 2300-2500 LTE
For more information please CONTACT us.
Antenna for Stadium, Triband SISO
Stadium Challenges for Mobile Services
- Multiple services GSM, UMTS and LTE, plus WiFi, Security, CDMA etc.
- Multiple Operators, neutral hosts
- High capacity
- High density
- High precision required in Antennas mounting
- Carefully designed sectorisation & calibration
DragonTECH Stadium Antenna 
- 824-960 / 1710-2170 / 2300-2500 LTE
- 9.5 dBi gain
- >30dB F/B Ratio
- 1.5 VSWR
- >± 45° ” 20dB attenuation
For more information please CONTACT us.