This refflector antenna is a special antenna designed for very high gain requirements, following are some examples.

Corridor

If you need to cover 2 corridors at 90 degrees, adjust the reflector so that all RF is radiated within this 90 degrees to maximise performance and you only need 1 antenna instead of 2 panel antenna.

Service sector restrictions

If you need to radiate highly directionally to a specific area; and do not want signal over spilt to outside this area, this antenna is for you. It can restrict RF to 40 degrees.

Network Selective Donor Antenna

If you have a repeater site with multiple networks, and that you do not want to pick up signal from competitors and re-transmit them inside the building, you can use this antenna to sharply point to the preferred BTS and use the reflector to selectively block other network out by the attenuation from the reflectors.

More Details here …

We will give you Spliiters with Jumper Cables Affixed!

We have a new series of Power Dividers that comes with the necessary Jumper Cables. The length and connectors can be customised.

This alleviates a lot of connections on site for a faster and easier implementation. In cases where clients are charged according to the BoQ this new idea greatly reduceds install cost.

We can customise Jumper Cables and RF components for you.

Check it out on our Products page.

Recently a lot of customers asked for QMA connectors and jumper cables.

Save Mating Time

QMA or Quick Lock SMA connectors enable fast and easy matings. It is a good alternative to SMA dna N type connectors. It uses a Snap-on mechanism to allow matings to be fast and secure. It is secure through a chamfer with a click sound during a positive mating.

The DragonTECH QMA connectors are tested against shock and multiple matings. Below is the straight type.

Save Space

QMA connectors have a lower space requirement because the use of a wrench is not needed here. In addition, the small size and the distance between connectors can be optimised on the equipment panel.

Below is the DragonTECH QMA Righ-angled connector.

We will supply Jumper Cable Assembly with RG223 cable.

For more information you can download our datasheet here:

QMA Connector series

We introduced our Smart Elevator Solution a few days ago.

Readers customers keep flooding emails in asking for dual band and triband versions. To save more people writing, here it is:

Dual band and Triband SES

This unit maintains performance with improved appearance.

It is compact and uses external donor and service antenna.

As before, customers can speify the bands and we will customise them.

Read on you will know why we are busy…

Perhaps the oldest product we offer are power dividers.

We re-invented the wheel

Our new splitters are easier to install, lighter in weight and handles low-high power with best performance:

Its a more complex RF world.

Quadplexer with 2 antenna outputs:

We are seeing more and more combined sites with multi operators. Apart from our POIs, we offer our diplexer, triplxer and now Quadplexers for both antenna site combining and also for use as POI.

Various options are available for Tetra 400 or 800 / GSM / DCS / CDMA / WCDMA.

Two versions are available:

• Low loss High performance
• Economic with slightly higher loss

Quadplexer GSM DCS WCDMA Tetra 410

Quadplexer CDMA WCDMA GSM+DCS

Please contact us for more details.

New SES

We are changing with the world. Having introduced our Smart Elevator Solution SES we proudly introduce our new generation product.

Integrated Antenna

We have integrated it with an internal built-in service antenna. This gives extra space savings inside Lift Cars and make it easy to install.

Install Inside Lift Cars – Easy Maintainenance

Our first generation SES was to be installed on top of lift cars. The stylish casing of the new SES allows you to install it  inside. This makes it much easier for maintenance as access is now easily possible without interrupting lift services.

This new generation SES marks the innovation effort we continuously made.

Multiband

We still maintain single band and multi band options for normal bands Tetra / CDMA / GSM / DCS / PCS / WCDMA.

Auto Setup / Diagnostics

Upon power up, the unit runs self diagnostics for apporpriate donor signal and the fully auto ALC will adjust output power to a level optimum for performance.

Please contact us for details.

This year’s event is completed. We will continue to be an active player in this strategic field.

F1 simulation game.

Samsung

Inside LGC Booth

ADC

LG showgirl

Samsung showgirl

Metal Cable Ties makes you stand out from competitors

We already changed to metal cable ties.

These ties are far better. They are durable, easy to use and most importantly, professional to impress the customer.

We use parts superior to our competitors and this can add to your company image too. Stay tuned we will share more tricks with you; or write to us.

We were amazed by some interior designs. Look at this site we installed recently.

Designer want it painted we insisted that it should be white

Click to enlarge it.

Our team did superb services working together with designers to blend our antenna with the ambience. The RF is the Science; the project is ART.

If you like it i will post more photos…